camInstructor Video Blog

Mastercam Dynamic Milling - Chaining Part 3

Written by camInstructor Mike | 4/17/19 10:00 AM

This is video three of five on chaining in Mastercams Highspeed Dynamic Toolpaths. This is taken from our online Highspeed Toolpath course which covers all aspects of the 2D Highspeed Toolpaths.

2D HighSpeed Chaining Part 3

This video explores Solid Chaining in Mastercams 2D Highspeed Toolpaths. If you would like a copy of the file used in this video and its accompanying exercise file, click the links below! Files are in Mcam2017 format but will work in any newer version as well. 

Chaining Part 3 

Chaining Part 3 Exercise

This video is part of a course we offer covering the 2D HighSpeed toolpaths in their entirety.  The course covers evertything from chaining, all of the toolpath types and their use, toolpath filtering, stock settings, speeds and feeds, and there are many exercise files as well so you can test out your newly learnt skills.

This first group of videos we've released into the blog cover chaining. The chaining used in the highspeed toolpaths differ from those used in the conventional toolpaths. Here, you need to define different areas of the toolpath. Once done correctly, the toolpaths themselves will figure out the cutting area. With some of this interpretation left to the software, you can see it is very important we define our area correctly. Once you've completed this video series, you can be confident in your chaining abilities to tackle any part thrown at you.

To continue on with this video series, here is a link to the second video in the chaining section of this course...

2D Highspeed Chaining Part 4

 

If you missed the first few videos in this series, you should have a look them before continuing on with the rest. Here is a link to the start of the series...

2D Highspeed Chaining Part 1

 

If you are currenty subscribed to camInstructor and do not see this 2D Dynamic Milling course in your available courses, contact sales@caminstructor.com to have this course activated. 

Want to learn more about Mastercam? Check out;

camInstructor for Teachers - Independent Learners - Students